EasyWeed® Adhesive HTV is compatible with cost-effective screen printing foils and other materials that lend themselves to adhesion, this adhesive is a money saver and a money maker!  Even on its own, EasyWeed® Adhesive HTV creates a glazed tone on tone appearance that's trending.  The milky colored adhesive features a pressure sensitive carrier and low application temperature that's gentle enough for almost all heat sensitive fabrics.

Application Instructions (Home Iron):

Set iron dial between Cotton and Linen
Cover design with Kraft Paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure for 10-15 seconds
If areas lift after application, cover and press for 5-10 seconds. Peel carrier hot

Application Instructions (Heat Press):

https://www.siserna.com/files/heat-transfer-vinyl-instructions.pdf

Cut in reverse and weed excess material Preheat garment for 2-3 seconds
Apply design at 275°F / 135°C

(EasyPress® users add approx. 30°) Use medium pressure for 5-10 seconds Peel carrier hot then apply top layer

Laundering:

Wait 24 hours before first wash Machine wash warm or cold with mild detergent
Do not bleach, dry clean, or use liquid fabric softener

Dry on normal dryer setting