UVSCH 910 Third Grade Dalmatian Dots with cursive
1. Clean your with alcohol and ensure that it is completely dry and dust free.
2. Peel the backing off of the transfer.
3. Align the design, ensuring it is positioned correctly prior to placing. Once any part of the transfer touches, you will not be able to reposition the transfer.
4. Press transfer onto your substrate working from the center out.
5. Use a felt lined squeegee to reduce bubbles but this can also be done with your fingers.
6. Once your transfer has been fully applied, SLOWLY roll the top transfer film away from your transfer. If any part of your transfer starts to peel up, lay the transfer film back down and rub/press/squeegee again in that area before removing the film again.
7. Cure for a minimum of 24 hours prior to using or washing.
*Please be aware that we are not responsible for any UV DTF transfers that are applied incorrectly or damaged during the application process. This type of transfer will require practice to become comfortable and successful with the application process.
![UVSCH 910 Third Grade Dalmatian Dots with cursive](http://tayloredvinyl.com/cdn/shop/files/SCH910WMThirdGradeDalmatianDotswithcursive_ad350aec-6e80-45b6-8152-d3e0d13edd6d.png?v=1722125430&width=1445)
UVSCH 910 Third Grade Dalmatian Dots with cursive